NEW Cleaners
TENI DEGREASER Deep Clean (Ready-to-Use Spray)
₹249.00 per 500 ml
TENI-Degreaser Deep Clean (TNI-DGC-RTU) is a commercial-grade, ready-to-use heavy kitchen and periodic tile scrub spray engineered to rapidly liquefy polymerized oils, animal fats, and grime-blackened grout lines. Formulated with a synergistic matrix of alkaline silicates, glycol ether coupling solvents, and chelating builders, it achieves over 95% soil removal efficiency within 3 to 5 minutes without etching cementitious binders or leaving chalky lime hazing. Safe for vitrified tiles, glazed ceramic, porcelain, granite, concrete, and stainless steel exhausts, each 500 mL ergonomic trigger spray bottle covers 20 to 25 m² (200 to 250 sq. ft.) and rinses away completely with zero slippery residue.
| Product Number | TNI-DGC-500RTU |
| Packing | 500 ml |
| Stock | In Stock (100 units) |
Product Description
TENI-Degreaser Deep Clean is a high-performance, alkaline cleaning and degreasing formulation engineered specifically to dissolve tough, baked-on cooking fats, stubborn motor oils, and deeply embedded grime on hard architectural surfaces. Designed for demanding commercial kitchens, industrial food preparation areas, and intensive domestic deep cleans, this ready-to-use (RTU) spray eliminates the guesswork of dilution, delivering maximum degreasing power directly from the bottle.
Unlike commodity caustic washes that pit surfaces or leave slippery residues, TNI-DGC-RTU pairs a buffered Sodium Metasilicate builder with 2-Butoxyethanol and biodegradable Lauryl Glucoside. This combination breaks down the molecular backbone of cross-linked vegetable oils and animal grease, suspending soils in water for effortless wipe-down and spot scrubbing.
Key Features & Performance Benefits
1. Dissolves Polymerized Grease: Rapidly softens and lifts baked-on grease films, carbonized oil splatters, and stubborn animal fats within 3 to 5 minutes of dwell time.
2. Grout-Safe Brightening: Restores dirt-blackened cementitious grout channels back to their original appearance without eroding, etching, or weakening the binder matrix.
3. Zero Chalky Hazing: Integrated Tetrasodium EDTA chelation binds free calcium and magnesium ions, preventing chalky mineral or silicate haze from drying onto glossy vitrified tiles.
4. Residue-Free Clean: Emulsifies greasy soils completely so they rinse away cleanly with a single damp cloth or mop pass, leaving floors bare, tactile, and slip-safe.
5. Targeted Trigger Spray: Convenient 500 mL trigger format allows direct, pinpoint application onto vertical splashbacks, exhaust hood housings, and isolated stain patches with zero mess.
Recommended Applications & Substrates
1. Substrates: Polished Glazed Vitrified Tiles (PGVT), Glazed Vitrified Tiles (GVT), Porcelain, Glazed Ceramic, Quarry Tiles, Polished Granite, Finished Concrete, and Stainless Steel Exhaust Hood exteriors.
2. Environments: Commercial restaurant kitchens, hotel food prep areas, residential kitchens, bakeries, food processing facilities, workshop floors, and service bays.
3. Incompatibilities: Do not use on reactive soft metals such as bare aluminum or zinc, and avoid contact with acid-sensitive unsealed calcareous stone. Keep away from strong acids (prevents exothermic neutralization).
Directions for Use
1. Surface Prep: Sweep or wipe away loose debris, coarse grit, and dry dust from the target surface.
2. Apply: Turn the trigger nozzle to the "SPRAY" position. Spray generously directly onto stained tile faces, greasy vertical splashbacks, or soiled grout channels until uniformly wet.
3. Dwell: Allow the solution to dwell undisturbed for 3 to 5 minutes to penetrate and liquefy hardened oil deposits. Do not allow the product to dry on the surface.
4. Agitate: Scrub firmly using a stiff nylon hand brush, scouring pad, or grout cleaning brush.
5. Extract & Rinse: Wipe away the dirty, suspended slurry using a clean damp microfiber cloth, wet mop, or squeegee. Follow with a final clean water rinse or wipe-down to leave the surface pristine, grease-free, and film-free.
Unlike commodity caustic washes that pit surfaces or leave slippery residues, TNI-DGC-RTU pairs a buffered Sodium Metasilicate builder with 2-Butoxyethanol and biodegradable Lauryl Glucoside. This combination breaks down the molecular backbone of cross-linked vegetable oils and animal grease, suspending soils in water for effortless wipe-down and spot scrubbing.
Key Features & Performance Benefits
1. Dissolves Polymerized Grease: Rapidly softens and lifts baked-on grease films, carbonized oil splatters, and stubborn animal fats within 3 to 5 minutes of dwell time.
2. Grout-Safe Brightening: Restores dirt-blackened cementitious grout channels back to their original appearance without eroding, etching, or weakening the binder matrix.
3. Zero Chalky Hazing: Integrated Tetrasodium EDTA chelation binds free calcium and magnesium ions, preventing chalky mineral or silicate haze from drying onto glossy vitrified tiles.
4. Residue-Free Clean: Emulsifies greasy soils completely so they rinse away cleanly with a single damp cloth or mop pass, leaving floors bare, tactile, and slip-safe.
5. Targeted Trigger Spray: Convenient 500 mL trigger format allows direct, pinpoint application onto vertical splashbacks, exhaust hood housings, and isolated stain patches with zero mess.
Recommended Applications & Substrates
1. Substrates: Polished Glazed Vitrified Tiles (PGVT), Glazed Vitrified Tiles (GVT), Porcelain, Glazed Ceramic, Quarry Tiles, Polished Granite, Finished Concrete, and Stainless Steel Exhaust Hood exteriors.
2. Environments: Commercial restaurant kitchens, hotel food prep areas, residential kitchens, bakeries, food processing facilities, workshop floors, and service bays.
3. Incompatibilities: Do not use on reactive soft metals such as bare aluminum or zinc, and avoid contact with acid-sensitive unsealed calcareous stone. Keep away from strong acids (prevents exothermic neutralization).
Directions for Use
1. Surface Prep: Sweep or wipe away loose debris, coarse grit, and dry dust from the target surface.
2. Apply: Turn the trigger nozzle to the "SPRAY" position. Spray generously directly onto stained tile faces, greasy vertical splashbacks, or soiled grout channels until uniformly wet.
3. Dwell: Allow the solution to dwell undisturbed for 3 to 5 minutes to penetrate and liquefy hardened oil deposits. Do not allow the product to dry on the surface.
4. Agitate: Scrub firmly using a stiff nylon hand brush, scouring pad, or grout cleaning brush.
5. Extract & Rinse: Wipe away the dirty, suspended slurry using a clean damp microfiber cloth, wet mop, or squeegee. Follow with a final clean water rinse or wipe-down to leave the surface pristine, grease-free, and film-free.